SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
ISA TR92.00.03-2014 Guide for Toxic Gas Detection as a Method of Personnel Protection standard by The International Society of Automation, 06/15/2014 Full Description Toxic gas detection in process safety management provides personnel protection by minimizing the...
IEST RP-PR003.1 HALT and HASS Recommended Practice by Institute of Environmental Sciences and Technology, 09/01/2012 Full Description IEST RP-PR003.1 defines and describes HALT (Highly Accelerated Life Testing) and HASS (Highly Accelerated Stress Screening). This RP...
INCITS 76-1981(R1998) Unformatted Single-Disk Cartridge (Top Loading, 200 tpi, 4400 bpi), General, Physical and Magnetic Requirements (formerly ANSI X3.76-1981(R1998)) standard by InterNational Committee for Information Technology Standards (formerly NCITS), 01/01/1981
MMPDS MMPDS-04 Chapter 6 Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 6 - Heat Resistant Alloys Handbook / Manual / Guide by Metallic Materials Properties Development and Standardization, 04/01/2008 Full Description The Metallic...
IES RP-7-20 Recommended Practice: Lighting Industrial Facilities standard by Illuminating Engineering Society, 03/23/2020 Full Description The primary purpose of this standard is to serve as a guide and educational tool for the design of permanently installed lighting...
ISA TR77.42.02-2014 Fossil Fuel Power Plant Compensated Differential Pressure Based Drum Level Measurement standard by The International Society of Automation, 06/05/2014 Full Description This technical report is intended to provide guidance in the application of...
IEST RP-CC013.3 Calibration Procedures and Guidelines for Selecting Equipment Used in Testing Cleanrooms and Other Controlled Environments Recommended Practice by Institute of Environmental Sciences and Technology, 08/01/2012 Full Description IEST RP-CC013.3 covers...
INCITS 72-1981(R1993) Parallel Recorded Magnetic Tape Cartridge for Information Interchange, 4-Track, 0.250 Inch (6.30 mm), 1600 bpi (63 bpmm), Phase Encoded (formerly ANSI X3.72-1981(R1993)) standard by InterNational Committee for Information Technology Standards (formerly NCITS), 01/01/1981
MMPDS MMPDS-04 Chapter 7 Metallic Materials Properties Development and Standardization (MMPDS) Handbook, Chapter 7 - Miscellaneous Alloys and Hybrid Materials Handbook / Manual / Guide by Metallic Materials Properties Development and Standardization, 04/01/2008 Full Description...
IES RP-41-20 Recommended Practice: Lighting Theaters and Worship Spaces, Includes Errata 1 (2021) Handbook / Manual / Guide by Illuminating Engineering Society, 03/23/2020 Full Description This document was developed to assist design professionals in specifying or...
ISA 75.10.02-2014 Installed Face-to-Face Dimensions for Dual Pinch Flanged Clamp or Pinch Valves (Classes 125 and 150) standard by The International Society of Automation, 04/15/2014 Full Description This document applies to valves, sizes NPS 1/2 (DN 15) through NPS 26...
IEST ESTECH12 2012 ESTECH Presentations Conference Proceeding by Institute of Environmental Sciences and Technology, 06/01/2012 Full Description 2012 ESTECH PRESENTATIONSGateway to Success, Learning from the Best - Orlando, FLPresentations of the 58th Annual Technical...