SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
b For materials whose strength has...
FCI 86-2-2000 Regulator Terminology standard by Fluid Controls Institute, Full Description A voluntary standard compiled by the Regulator Section of FCI to establish common and preferred terminology for regulators Product Details...
ESD SP10.1-2016 Automated Handling Equipment (AHE) standard by EOS/ESD Association, Inc., 2016 Full Description This standard practice provides procedures for evaluating the electrostatac environment associated with automated handling equipment....
DOD DOD-P-63479/1 Notice 4 - Validation 3 PIN, STRAIGHT, HEADED (CLEVIS PIN), METRIC Amendment by Department of Defense, 09/24/2018
Engineering Specification for the Selection, Installation and Maintenance of Pipeline Strainers Book by Fluid Controls Institute, Full Description This guide has been established to provide project engineers and managers with the background and information necessary to make...
ESD TR25.0-01-16 For Electrostatic Discharge Sensitivity Testing - Charged Board Event (CBE) standard by EOS/ESD Association, Inc., 2016 Working Group 25.0, Charged Board Event Full Description While no industry standard currently exists for CBE testing, this...
FCI 91-1-1997 (R2003) Standard for Qualification of Control Valve Stem Seals standard by Fluid Controls Institute, Full Description This standard shall apply to rotary and linear motion control valves. Bellows, diaphragms and tubular stem seals are not covered by this...
DOD DOD-W-70336/1 Notice 2 - Validation 1 WASHER, LOCK SPRING, HELICAL, REGULAR SERIES, (METRIC) Amendment by Department of Defense, 09/24/2018
ESD S13.1-2015 Electrical Soldering/Desoldering Hand Tools standard by EOS/ESD Association, Inc., 12/23/2015 Full Description This standard provides electrical soldering/desoldering hand tool test methods for measuring current leakage, tip to ground reference point...
FCI 95-1-1995 Pressure Regulator and Temperature Regulator Specificiation Sheets standard by Fluid Controls Institute, Full Description Industry developed specification sheets for pressure and temperature regulators. Includes Excel files and Word instruction sheets, the...
DOD DOD-W-70336 Notice 2 - Validation 1 WASHERS, LOCK, (METRIC) GENERAL SPECIFICATION FOR Amendment by Department of Defense, 09/24/2018
ESD STM3.1-2015 Ionization standard by EOS/ESD Association, Inc., 11/19/2015 Full Description This document provides test methods and procedures for evaluating and selecting air ionizationequipment and systems (ionizers).This standard test method establishes measurement...
FCI 97-1-1998 Standard for Production Testing of Secondary Pressure Drainers standard by Fluid Controls Institute, Full Description This standard specifies production tests that are considered applicable to secondary pressure drainers.These tests may be conducted to...