SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
b For materials whose strength has...
FCI 85-1-2011 Standard for Production Testing for Steam Traps standard by Fluid Controls Institute, 01/01/2011 Full Description This standard specifies production and performance tests that are considered applicable to steam traps. These tests may be conducted to ensure...
DOD DOD-STD-2188 Notice 1 - Validation 1 BABBITTING OF BEARING SHELLS (METRIC) Amendment by Department of Defense, 01/20/2021
ESD SP5.2-2019 Machine Model (MM) Component Level standard by EOS/ESD Association, Inc., 2019 Full Description ESD SP5.2-2019 establishes the procedure for testing and characterizing the electrostatic discharge (ESD) sensitivity (withstand voltage) of components...
FCI 91-1-2010 Standard for Qualification of Control Valve Stem Seals standard by Fluid Controls Institute, 10/01/2010 Full Description FCI 91-1-2010 shall apply to rotary and linear motion control valves. Bellows, diaphragms and tubular stem seals are not covered by this...
DOD DOD-B-24668 Notice 1 - Validation 1 BEARING UNIT, MAIN THRUST, SUBMARINE PROPULSION SYSTEM Amendment by Department of Defense, 01/19/2021
ESD SP9.2-2019 Foot Grounders Resistive Characterization (excluding static control footwear) standard by EOS/ESD Association, Inc., 02/22/2019 Full Description ESD SP9.2-2019 is intended for testing foot grounders used for grounding personnel engaged in working with ESD...
FCI 79-1-2009 Standard for Proof of Pressure Ratings for Pressure Regulators standard by Fluid Controls Institute, 12/01/2009 Full Description 1. SCOPE1.1 This standard describes the recommended proof testing of pressure regulators for operation at or below the...
DOD DOD-STD-2183 Notice 2 - Validation 2 BOND TESTING, BABBITT-LINED BEARINGS Amendment by Department of Defense, 01/13/2021
ESD JS-002-2018 ANSI/ESDA/JEDEC Joint Standard for Electrostatic Discharge Sensitivity Testing, Charged Device MOdel (CDM) - Device Level standard by EOS/ESD Association, Inc., 12/17/2018 Full Description The purpose (objective) of JEDEC/ESDA JS-002-2018 is to establish...
FCI 87-1-2009 Classification and Operating Principles of Steam Traps standard by Fluid Controls Institute, 12/01/2009 Full Description This standard is for the purpose of establishing and illustrating various classifications of Steam Traps in accordance with their basic...
DOD DOD-STD-2101 Notice 1 - Validation 1 CLASSIFICATION OF CHARACTERISTICS Amendment by Department of Defense, 01/08/2021
ESD SP5.3.3-2018 Charged Device Model (CDM) Testing - Component Level Low-Impedance Contact CDM as an Alternative CDM Characterization Method standard by EOS/ESD Association, Inc., 2018 Full Description ESD SP5.3.3-2018 establishes the procedure for testing devices and...