SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
I3A IT4.24-1997 (R2003) Photography (Processing) - Processing Trays and Tanks - Specifications standard by International Imaging Industry Association, 01/06/1997 Full Description Specifies requirements for film clips and hangers used to hold photographic films and dental...
GAMP Good Practice Guide: Calibration Management Handbook / Manual / Guide by International Society for Pharmaceutical Engineering, 12/01/2001 Full Description The GAMP Good Practice Guide: Calibration Management is the first in a series of GAMP guidance on specific topics....
Handbook of The Common Cracks in Green P/M Compacts Handbook / Manual / Guide by Metal Powder Industries Federation, 1997 Haimian Cai and David Zenger Full Description The Handbook is a product of the Powder Metallurgy Research Center (PMRC) at Worcester Polytechnic...
HEI Tech Sheet #141 Plate Heat Exchanger Fouling Data Sheet by Heat Exchange Institute, 10/27/2016
ISPE Baseline Guide: Volume 5 - Commissioning and Qualification Handbook / Manual / Guide by International Society for Pharmaceutical Engineering, 03/01/2001 Full Description This Guide provides advice and guidance that may be applied to all types of facilities, utilities, and...
HEI Tech Sheet #138 Maximum Allowable Stresses on Austenitic Feedwater Heater Tubes Data Sheet by Heat Exchange Institute, 04/20/2016
Atomization : The Production of Metal Powders Handbook / Manual / Guide by Metal Powder Industries Federation, 06/01/1992 Lawley, Alan Full Description The objective of this monograph is to examine atomization technology in detail from both an operational view point and...
ISPE Baseline Guide: Volume 4 - Water and Steam Systems Handbook / Manual / Guide by International Society for Pharmaceutical Engineering, 01/01/2001 Full Description This Guide is intended for the design, construction, and operation of new water and steam systems. The purpose of...
HEI Tech Sheet #140 Condenser Frequently Asked & Typical Questions Data Sheet by Heat Exchange Institute, 04/20/2016
Soft Magnetism, Fundamentals for Powder Metallurgy and Metal Injection Molding Book by Metal Powder Industries Federation, 1992 Chaman Lall, Ph.D. Full Description This monograph introduces the subject of soft magnetism to engineers, technologists and technical sales...
I3A IT4.34-1997 Photography - Prepackaged Chemicals for the Processing of Silver-Halide-Based Materials - Vocabulary (revision and redesignation of ANSI PH4.34-1991) (same as ANSI/ISO 5989-1995) standard by International Imaging Industry Association, 01/06/1997 Full Description...
ISPE Baseline Guide: Volume 3 - Sterile Manufacturing Facilities Handbook / Manual / Guide by International Society for Pharmaceutical Engineering, 01/01/1999 Full Description The Sterile Manufacturing Facilities Baseline Guide addresses the design, construction, commissioning,...