SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
FORD WSS-M6G18-A 2004 Edition, October 28, 2004 ANTI-SQUEAK TAPE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M11G28-A2 2000 DECORATIVE WOOD VENEER, WALNUT-JUGLANS NIGRA, QUARTER CUT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M11G29-A 2004 Edition, October 25, 2004 DECORATIVE WOOD VENEER, ELM, ULMUS AMERICANA, BURL CUT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M11G29-A2 2000 DECORATIVE WOOD VENEER ELM, ULMUS AMERICANA, QUARTER CUT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M11G29-A3 2000 DECORATIVE WOOD VENEER, ELM, ULMUS AMERICANA, CROWN CUT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M64J19-A1 1983 Edition, February 22, 1983 PRIMER, WATERBORNE CATIONIC ELECTROCOAT - INITIAL FILL, BLACK - LOW SOLIDS TYPE FILL
FORD WSF-M2D436-A 1991 Edition, November 12, 1991 THERMOPLASTIC ELASTOMER (TPE) MOLDING COMPOUND, 86 DUROMETER A HARDNESS, INTERIOR
FORD WSS-M3D187-A2 2000 UNSATURATED POLYESTER (UP), 50% GLASS FIBER REINFORCED SHEET MOLDING COMPOUND U.V. STABILIZED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M99C103-B3 2005 Edition, October 28, 2005 ADDITIVE, FLUORESCENT DYE FOR OIL ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD FLTM EU-BI 009-01 2000 REPLACED BY FLTM BI 109-01
FORD ESS-M1A160-A 1973 Edition, August 1973 ENGINEERING, MATERIAL, AND PERFORMANCE REQUIREMENTS FOR CARBON STEEL TAPPING SCREWS ***TO BE USED WITH FORD WSS-M99P1111-A
FORD WSS-M2P189-A63 2000 PLATING PERFORMANCE, 60 CYCLES APG/APG'E' CORROSION, HIGH VISIBILITY ***TO BE USED WITH FORD WSS-M99P1111-A***