SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
FORD WSK-M8G220-A2 2012 Edition, May 9, 2012 GASKET, CORK/RUBBER (NBR) , HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8G224-A 2012 Edition, May 9, 2012 GASKET, STEEL CORE, ARAMIDE FIBER SHEET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8G222-A 2012 Edition, May 9, 2012 GASKET, STEEL CORE, ARAMIDE FIBER SHEET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8G225-A2 2000 GASKET, STEEL CORE, FIBER SHEET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8G225-A3 2000 GASKET, STEEL CORE, FIBER SHEET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSP-M8G207-B3 2012 Edition, May 9, 2012 GASKET, AUTOMATIC TRANSMISSION FLUID AND CRUSH RESISTANT, MINERAL/CELLULOSE FIBER FILLED WITH FULLY CURED NITRILE BINDER, MEDIUM DENSITY 1.15 g/cm3 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8G220-A1 2012 Edition, May 9, 2012 GASKET, CORK/RUBBER (ACM) , HIGH HEAT RESISTANT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8G225-A 2012 Edition, May 9, 2012 GASKET, STEEL CORE, FIBER SHEET ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M8G234-A 2012 Edition, May 9, 2012 GASKET, CELLULOSE FIBERS AND NBR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M6J106-A 2012 Edition, May 10, 2012 PRIMER SURFACER, LOW GLOSS, FIBERGLASS REINFORCED POLYESTER PLASTICS ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M6J119-B 2012 Edition, May 10, 2012 PRIMER SURFACER, TAUPE - EPOXY - LOW BAKE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESB-M6J108-A 2000 PRIMER, WELDING - ZINC RICH, SOFT SETTLING TYPE - BRUSH - EXEMPT SOLVENT ***TO BE USED WITH FORD WSS-M99P1111-A***