SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
FORD ESA-M2D122-A 2011 Edition, January 4, 2011 HOSE, LOW PRESSURE - POWER STEERING ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M2D191-B 2004 Edition, September 9, 2004 HOSE, EPDM - HEATER ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD ESA-M3P31-A 2003 Edition, August 29, 2003 PHOSPHATE COATING, MANGANESE IRON, MICROCRYSTALLINE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WK2 1993 Edition, December 1993 WELDING CABLES LOW REACTANCE (WATER COOLER)
FORD WSA-M11A45-A1 2005 Edition, February 9, 2005 SOLDER, TIN BASED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1P77-B2 2000 PLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER ZINC ALLOY - GENERAL EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M1P77-B3 2000 PLATING, BRIGHT OR LOW GLOSS DECORATIVE OVER ZINC ALLOY - SPECIAL EXTERIOR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M28G24-A 2006 Edition, September 14, 2006 GLASS, SAFETY, LAMINATED FLOAT, 5.6 MM NOMINAL THICKNESS, 0.76 MM POLYVINYL, BUTYRAL LAMINATE, SOLAR TINT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M28G25-A 2000 GLASS, SAFETY, LAMINATED FLOAT, 5.6 MM NOMINAL THICKNESS, 0.76 MM POLYVINYL, BUTYRAL, LAMINATE, COMBINATION HEAT ABSORBING AND SOLARTINT ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M28G26-A 2006 Edition, September 14, 2006 GLASS, SAFETY, HEAT TREATED FLOAT, SOLAR TINT, 3.2 MM ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M28G27-A 2000 GLASS SAFETY, HEAT TREATED FLOAT, SOLAR TINT, 4.0 MM ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M28G28-A 2000 GLASS, SAFETY, HEAT TREATED FLOAT, SOLAR TINT, 4.8 MM ***TO BE USED WITH FORD WSS-M99P1111-A***