SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
FORD WSA-M1C246-A 2010 Edition, November 18, 2010 GREASE, CONTROL LUBRICATING, SYNTHETIC OIL, NLGI 1/2 ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4A178-A2 2000 BRASS ROD, LOW FUMING, COATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D192-B 1992 Edition, September 28, 1992 POLYVINYL BUTYRAL (PVB) FILM, HIGH PERFORMANCE LAMINATED SAFETY GLASS, CLEAR, REFRIGERATED
FORD WSB-M4D356-B 2005 Edition, May 31, 2005 POLYVINYL BUTYRAL (PBV) FILM, TINTED INTERLAYER LAMINATED SAFETY GLASS, LOW LIGHT TRANSMITTANCE, DUSTED OR REFRIGERATED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSB-M4D844-A6 2000 POLYPHENYLENE ETHER + POLYSTYRENE BLEND (PPE+PS) MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSE-M1P93-A2 2000 PLATING, TIN/ZINC ALLOY, ELECTROPLATED OVER FERROUS SURFACES ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSG-M4D901-A1 2010 Edition, January 20, 2010 POLYETHYLENE, HIGH DENSITY (PE-HD) BLOW MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSH-M4D888-A1 2010 Edition, January 25, 2010 POLYETHYLENE TEREPHTHALATE (PET) 45 % GLASS FIBER REINFORCED MOLDING COMPOUND 100 % RECYCLED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M11P57-A4 2000 PERFORMANCE, STRUCT, ADHESIVE; 1 COMP., PUR; NON CONDUCTIVE ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M28G21-A 2006 Edition, September 14, 2006 GLASS, SAFETY, HEAT TREATED FLOAT, CLEAR ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M28G22-A 2000 GLASS, SAFETY, HEAT TREATED FLOAT, TINTED ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSK-M2A156-A1 2003 Edition, September 22, 2003 SPECIAL BRASS - NI-AL-SI-ALLOY ***TO BE USED WITH FORD WSS-M99P1111-A***