SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA JAW3788 Journal AWWA - Experience With Direct Filtration at Ontario's Lake Huron Treatment Plant Journal Article by American Water Works Association, 03/01/1980 Foley, Paul D. Full Description Since 1967 the Lake Huron treatment plant in Ontario has...
AWWA JAW3791 Journal AWWA - The Use of Chloramines to Prevent Trihalomethane Formation Journal Article by American Water Works Association, 03/01/1980 Norman, Thomas S.;Harms, Leland L.;Looyenga, Robert W. Full Description Chloramines offer a relatively...
AWWA JAW3722 Journal AWWA - Grounding of Electric Circuits to Water Services: One Utility's Experience Journal Article by American Water Works Association, 02/01/1980 Guerrera August A. Full Description Water suppliers have unwillingly, and sometimes...
AWWA JAW3721 Journal AWWA - Grounding of Electric Circuits to Water Services: National Electrical Code Versus AWWA Policy Journal Article by American Water Works Association, 02/01/1980 Steffan, Robert F. Full Description The National Electric Code (NEC),...
AWWA JAW3712 Journal AWWA - The Logistic Curve as a Model for Carbon Bed Design Journal Article by American Water Works Association, 01/01/1980 Oulman, Charles S. Full Description The technique for determining design parameters for activated carbon columns...
AWWA C751-19 Magnetic Inductive Flowmeters standard by American Water Works Association, 04/01/2020 Full Description The purpose of this document is to review magnetic inductive flowmeter (magmeter) principles of operation, calibration, and selection. The performance and...
AWWA C622-19 Pipe Bursting of Potable Water Mains 4 In. (100 mm) to 36 In. (900 mm) standard by American Water Works Association, 03/01/2020 Full Description The purpose of this standard is to provide the minimum requirements for pipe bursting existing potable water...
AWWA M72 Knife Gate Valves Handbook / Manual / Guide by American Water Works Association, 2020 Full Description Information contained in this manual is useful for operators, technicians, and engineers to gain a basic understanding of the use and application of manual and...
AWWA D108-19 Aluminum Dome Roofs for Water Storage Facilities standard by American Water Works Association, 11/01/2019 Full Description This standard establishes minimum criteria for the design, fabrication, and erection of structurally supported aluminum dome roofs....
AWWA G485-18 Direct Potable Reuse Program Operation and Management standard by American Water Works Association, 06/01/2018 Full Description This standard describes the critical requirements for the effective operation and management of a direct potable reuse (DPR) water...
AWWA WQTC65956 Alternative TOC Removal Requirements for Cost-Savings While Not Compromising Your Water Quality Treatment Goals Conference Proceeding by American Water Works Association, 11/01/2007 Wang, Yong; Forrest, Yvonne; Littleton, Mark; Belhateche, Dannelle Full...
AWWA JAW65238 Journal AWWA - Removal of Organics and Control of Bromate for a Southern China Water Supply Journal Article by American Water Works Association, 10/01/2007 Guo, Zhaohai; Pei, Yishan; Yang, Min; Zhang, Yu; Zhang, Jinsong; Fan, Jie; Hirotsuji, Junji Full...