SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA C621-18 Internal Pipe Joint Seal Assemblies for Water Service standard by American Water Works Association, 12/01/2018 Full Description This standard describes the selection and installation requirements for field-applied, mechanical, internal pipe joint seal...
AWWA C305-18 CFPR Renewal and Strengthening of Prestressed Concrete Cylinder Pipe (PCCP) standard by American Water Works Association, 12/01/2018 Full Description The purpose of this standard is to provide the minimum requirements for material selection, design,...
AWWA B407-18 Liquid Ferric Chloride standard by American Water Works Association, 11/01/2018 Full Description AWWA B407-18 describes ferric chloride in aqueous (liquid) form for use in the treatment of potable water, wastewater, and reclaimed water. Applications of the...
AWWA C507-18 Ball Valves, 6 In. Through 48 In. (150 mm Through 1,500 mm) standard by American Water Works Association, 08/01/2018 Full Description This standard covers gray-iron, ductile-iron, and cast-steel flanged-end, low-leakage, shaft- or trunnion-mounted,...
AWWA F120-18 Ozone Systems for Water standard by American Water Works Association, 07/01/2018 Full Description This standard describes the minimum requirements for ozone systems and equipment used to treat potable water, wastewater, reclaimed water, and storm water. This...
AWWA B605-18 Reactivation of Granular Activated Carbon standard by American Water Works Association, 06/01/2018 Full Description This standard describes the procurement of granular activated carbon (GAC) reactivation services and the use of reactivated GAC for potable...
AWWA B303-18 Sodium Chlorite standard by American Water Works Association, 05/01/2018 Full Description This standard describes sodium chlorite, in either solid (granular, flake, or powdered) or aqueous-solution form, for use in making chlorine dioxide for use in the...
AWWA C514-20 Air Valve and Vent Inflow Preventer Assemblies for Potable Water Distribution System and Storage Facilities standard by American Water Works Association, 04/01/2021 Full Description The purpose of this standard is to provide the minimum requirements for...
AWWA WQTC71487 Wavelength-Dependent UV Dose Response of Three Different Types of Dyed Microspheres for Lagrangian Actinometry Conference Proceeding by American Water Works Association, 11/01/2009 Chan, Po-Shun; Blatchley, Ernest R., III; Shen, Chengyue; Scheible, O. Karl; Holdman,...
AWWA C710-09 Cold-Water Meters-Displacement Type, Plastic Main Case standard by American Water Works Association, 11/01/2009 Full Description This standard covers the various types and classes of cold-water displacement meters with plastic main cases, in sizes 1/2 in....
AWWA C303-08 Concrete Pressure Pipe, Bar-Wrapped, Steel-Cylinder Type standard by American Water Works Association, 10/01/2009 Full Description This standard covers the manufacture of concrete pressure pipe, reinforced with a steel cylinder that is helically wrapped with...
AWWA WQTC65854 Electrolysis of Drinking Water and It's Effect on Microbial Survival Conference Proceeding by American Water Works Association, 11/01/2007 Kimbrough, David Eugene; Kouame, Yao; Moheban, Parvaneh; Springthorpe, Susan; Boulos, Lina Full Description...