SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA M24 Planning for the Distribution of Reclaimed Water Handbook / Manual / Guide by American Water Works Association, 2018 Full Description The distribution of reclaimed water using dual water distribution systems, one for potable water and the other for nonpotable...
AWWA M62 Membrane Applications for Water Reuse, First Edition Handbook / Manual / Guide by American Water Works Association, 2018 Full Description Reverse osmosis (RO) membranes have been used in water reuse since the 1960s, however; the use of membranes in full-scale...
AWWA M33 Flowmeters in Water Supply, Third Edition Handbook / Manual / Guide by American Water Works Association, 2018 Full Description This manual provides information about the most common large flowmeters used in water treatment and in custody-transfer applications,...
AWWA C208-17 Dimensions for Fabricated Steel Water Pipe Fittings standard by American Water Works Association, 12/01/2017 Full Description This standard provides formulas to calculate overall dimensions of fittings for steel water transmission and distribution...
AWWA C220-17 Stainless Steel Pipe 1/2 IN (13mm) and Larger standard by American Water Works Association, 11/01/2017 Full Description This standard pertains to stainless-steel pipe that is seamless, longitudinalseam, or spiral-seam welded; 1/2 in. (13 mm) in nominal...
AWWA C907-17 Polyvinyl Chloride (PVC) Pressure Fittings for Water-4 in. through 12 In. (100 mm through 300 mm) for Water Distribution standard by American Water Works Association, 11/01/2017 Full Description This standard describes Pressure Class 235 (PC235) polyvinyl...
AWWA C901-17 Polyethylene (PE) Pressure Pipe and Tubing, 1/2 In. (13 mm) Through 3 In. (76 mm), for Water Service standard by American Water Works Association, 11/01/2017 Full Description This standard describes polyethylene (PE) pressure pipe and tubing made from...
AWWA C810-17 Standard for Replacement and Flushing of Lead Service Lines standard by American Water Works Association, 11/01/2017 Full Description This standard describes essential procedures for the replacement of lead water service lines and flushing following...
AWWA C227-17 Bolted, Split-Sleeve Couplings standard by American Water Works Association, 11/01/2017 Full Description This standard describes bolted, split-sleeve couplings (couplings) used to join pipe of similar outside diameter. Couplings may be manufactured from...
AWWA G100-17 Water Treatment Plant Operation and Management standard by American Water Works Association, 08/01/2017 Full Description The purpose of this standard is to define the critical requirements for the operation and management of water treatment plants, including...
AWWA C219-17 Bolted Sleeve-Type Couplings for Plain-End Pipe standard by American Water Works Association, 08/01/2017 Full Description This standard describes bolted sleeve-type couplings, reducing or transition couplings, and flanged coupling adapters (couplings) used...
AWWA M49 Quarter-Turn Valves: Head Loss, Torque, and Cavitation Analysis, Third Edition Handbook / Manual / Guide by American Water Works Association, 06/01/2017 Full Description This manual presents a recommended method for calculating operating torque, head loss, and...