SECTION IIMATERIALSPart DProper ties MetricASME BPVC.II.D.M-20232023...
SECTION IIMATERIALSPart CSpecifications for Welding Rods,Electrodes, and...
SECTION IIMATERIALSASME BPVC.II.A-2023Part AFerrous Material...
Part AFerrous Material SpecificationsBeginning to SA-450SECTION...
STATEMENT OF POLICY ON THE USE OF THE ASME SINGLECERTIFICATION MARK AND...
AWWA C620-19 Spray-In-Place Polymeric Lining for Potable Water Pipelines, 4 In. (100 mm) and Larger standard by American Water Works Association, 07/01/2019 Full Description This standard describes the requirements for materials, equipment, certification, and procedures...
AWWA D103-19 Factory-Coated Bolted Steel Tanks for Water Storage standard by American Water Works Association, 07/01/2019 Full Description The purpose of this standard is to provide minimum requirements for the design, construction, inspection, and testing of new...
AWWA F102-19 Matched-Die Molded, Fiberglass-Reinforced Plastic Weir Plates, Scum Baffles, and Mounting Brackets standard by American Water Works Association, 05/01/2019 Full Description This standard describes the minimum requirements for fiberglass-reinforced plastic...
AWWA C520-19 Knife Gate Valves, Sizes 2 In. (50 mm) Through 96 In. (2,400 mm) standard by American Water Works Association, 05/01/2019 Full Description This standard describes fabricated steel and stainless-steel tapping sleeves used to provide outlets and branches on...
AWWA C223-19 Fabricated Steel and Stainless Steel Tapping Sleeves standard by American Water Works Association, 05/01/2019 Full Description The purpose of this standard is to provide minimum requirements for stainless steel and ductile-iron body knife gate valves with...
AWWA C305-18 CFPR Renewal and Strengthening of Prestressed Concrete Cylinder Pipe (PCCP) standard by American Water Works Association, 12/01/2018 Full Description The purpose of this standard is to provide the minimum requirements for material selection, design,...
AWWA WQTC71658 Formation of Polar Brominated Disinfection Byproducts during Chloramination of Drinking Water Conference Proceeding by American Water Works Association, 11/01/2009 Zhai, Hongyan; Zhang, Xiangru Full Description This powerpoint presentation begins...
AWWA C542-09 Electric Motor Actuators for Valves and Slide Gates standard by American Water Works Association, 11/01/2009 Full Description This standard describes electric motor actuators that are externally mounted on gate, ball, plug, cone, globe, and butterfly valves...
AWWA C541-08 Hydraulic and Pneumatic Cylinder and Vane-Type Actuators for Valves and Slide Gates standard by American Water Works Association, 11/01/2009 Full Description This standard describes hydraulic and pneumatic cylinder- and vane-type actuating devices that are...
AWWA WQTC65863 A Feasibility Assessment of Membrane Process Retrofit in a 40 mgd Ozonation and Softening WTP Conference Proceeding by American Water Works Association, 11/01/2007 Atasi, Khalil Z.; Reynhout, Jeffrey W.; McCormack, Clayton; Suszek, Thomas A. Full Description...
AWWA WQTC65806 The Effect of Phosphate on the Morphological and Spectroscopic Properties of Copper Drinking Water Pipes Experiencing Localized Corrosion Conference Proceeding by American Water Works Association, 11/01/2007 White, Colin; Lytle, Darren Full Description...
AWWA WQTC65987 Online SPE-LC-MSMS for the Quantification of Pharmaceuticals, Personal Care Products and Endocrine Disruptors in Drinking Water Sources of the Montreal Region (Quebec, Canada) Conference Proceeding by American Water Works Association, 11/01/2007 Viglino, Liza; Aboulfadl,...